|
Plastic Industry Equipment (Used) : AVAILABLE TO SELL
Location: USA, ROCKVILLE CENTRE NEW YORK
Irwin Thermoforming Line.
Irwin Model 50NT-14 Thermoformer – New 2005
Type HTRH50-157-LT
480 volts 3 Phase – 60 Hz.
Complete line with un-winder, feeder, oven, trim press, and Grinder
Maximum Chain Speed: 200″/sec.(5080 mm) Sheet Width: Max 52.5″ (1334 mm) Min 30″ (762 mm)
Heat Tunnel: Length: 160″ x 220″ (4064-5334 mm) – Hating Element: Standard: Cal Rod Optional: Quartz – Temperature Control: B & R Automation, +2 at 600 deg. F 1 at 316 deg C
Former: Sheet Width: Maximum 52″ Wide (1321 mm), Minimum 30″ (762 mm) – Maximum Mold Size: 50″ wide (1270mm) Depth of Draw: Standard: 2.50″ (64 mm), Optional: up to 3.5″ (83 mm) – Press Rating: 60 Tons – Shut Height: Standard: 10″ (254 mm), optional Up to 14″ (356 mm) Platen Travel: 3.78″ (96 mm) Standard.
Trim Press: Maximum: 52″ wide (1321 mm), Minimum 30″ (762 mm) – Product Deoth: Standard: 2.50″ (64 mm) Optional: 3.5″ –
Stroke: 6″ (152 mm) – Maximum Cutting Force: 27.45 Tons – Standard Platen Opening: Index Direction: 14″ (356 mm) Across Sheet: Dry Circle Speed: 200 RPM – Servo Pick: Standard – Servo Canopy: Standard – Self Feed Treadle (Auto Start) Standard – Servo Ejector: Operational (Linear Rack Pinion)
50′ material width (1,270 mm)
27 Cycle Per Minute
From 12 to 28 parts per cycle depending on product size
Capable of producing 20,000 to 45,000 parts per hour or 600 lbs. /hour approx
Listing ID: LA1238412
|
|
