polychange.com

Used Plastics Industry Equipment Category

Add a Listing       View Listings

Back to Other Plastic Related Information

GRADES INCLUDED

  • Used Plastic Extruders

  • Used Blow Molding Equipment

  • Film/Sheet Equipment

  • Used Injection Molding Machines

  • Used Granulator/Shredders

  • Hoppers/Loaders

  • Used Plastic Industry Equipment






  • ADD A LISTING TO THE EXCHANGE


    Used Plastics Industry Equipment

    Select the material / item to buy or sell :


    Choose Wanted OR Available :


    Country:

    Email:




    To receive these types of leads by email with the full contact information included in the email,
    subscribe to our value added service

    WANTED : Used Injection Molding Machines - LW1240711
    Shipping Pt. / Location: INDIA, JALGAON MAHARASHTRA
    Usedinjection mouding machine 775/850. Usedinjection mouding machine 775/850
    Quantity
    Units
    Frequency
    2
    each
    One Time Only
    Price
    Funds
    Per Unit
    5000000/6500000
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    WANTED : Plastic Extruders - LW1240583
    Shipping Pt. / Location: INDIA, COIMBATORE TN
    Extusion plant . We meed all used monofilament extrusion plant forpet nylon pp pe or Recycling
    Quantity
    Units
    Frequency
    10
    each
    Year
    Price
    Funds
    Per Unit
    10000
    USD
    yard
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Blow Molding Equipment - LA1240202
    Shipping Pt. / Location: CHINA, HAIKOU HAINAN
    used PET bottle blow molding machine. Using PET material, KINTL-5G blow molding machine is especially used to produce 3 gallon and 5 gallon bottles and is widely used to produce any shape of plastic from PET with neck finishes from 15mm-200mm.. Those bottles are mainly used to contain pure drinking water for office and family uses. Our KINTL-5G is designed to produce high quality water drums at very competitive prices.
    Quantity
    Units
    Frequency
    -
    -
    -
    Price
    Funds
    Per Unit
    8000
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Granulator/Shredders - LA1239842
    Shipping Pt. / Location: USA, TUCKER GEORGIA
    45 HP Nelson Granulator and 7 meters long convey belt. used 45 HP Nelson Granulator and 7 meters long convey belt for sale
    Quantity
    Units
    Frequency
    1
    each
    One Time Only
    Price
    Funds
    Per Unit
    5000
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    WANTED : Used Plastic Industry Equipment - LW1239825
    Shipping Pt. / Location: INDIA, YAMUNA NAGAR HARYANA
    Pet bottle scrap machine. Demo Pet bottle scrap machine
    Quantity
    Units
    Frequency
    1
    each
    once
    Price
    Funds
    Per Unit
    -
    -
    -
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    WANTED : Other Used Plastic Industry Equipment - LW1238986
    Shipping Pt. / Location: CANADA, MISSISSAUGA CHOOSE...
    Densifier. A densifier or cutting compactor for feeding film and fiber, capacity 3000 Lbs/Hour
    Quantity
    Units
    Frequency
    1
    each
    One Time Only
    Price
    Funds
    Per Unit
    -
    -
    -
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    WANTED : Plastic Extruders - LW1238985
    Shipping Pt. / Location: CANADA, ONTARIO
    Single Screw Extruder. Our Canadian and USA facility is looking for new or less used equipment. Single screw extruder, capacity 3000 Lbs/Hour with auto screen changer and vacuum venting. For compounding PP, preferred screw size 40:1
    Quantity
    Units
    Frequency
    1
    each
    One Time Only
    Price
    Funds
    Per Unit
    -
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Plastic Industry Equipment - LA1238623
    Shipping Pt. / Location: USA, EL DORADO KS
    Float/Sink Tank - Large Custom Built . Large Custom Built Float/Sink Tank with paddles, auger and 2 dryers. Please contact for more info.
    Quantity
    Units
    Frequency
    1
    each
    One Time Only
    Price
    Funds
    Per Unit
    100,000
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Extruders - LA1238444
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    2.5" 24:1 WelexRebuilt Extruder Mint - Plug and Play!. 2.5" Welex Model No.2.5 -24:1 R.H Rebuilt Extruder Rebuilt Gear Box. Gear Ratio: New Barrel. New Tempco Cast Finn Heaters. New Thermocouples. New Wiring. New Barrel Cooling Fans. New Gate. General Purpose Screw. New Control Panel with Four Barrel Zones and Four Die Zones New thermocouples. Control Circuit 110 Volt with Step Down Transformer. RKC Dual Display Controllers. RPM Meter Amp Meter E- Stop. Amp Meters with individual Zone Shut off. Pressure Gauge with Rupture Disc. New 50 H.P. AC Motor and Drive. New Sheet Metal and Guards. New Hopper. 480 Volt.
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    60,500.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Extruders - LA1238443
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    2.5" NRM PMIII Extruder - Rebuilt - Mint - Plug and Play. 2 1/2'' NRM PM 111 Extruder Rebuilt Gear Box. Gear Box Ratio: 17.1 New Barrel. Used General Purpose Screw Good Condition. New Tempco Cast Finn Heater Bands with shrouds. New Blowers. New Thermocouples. New Pulleys and Belts. Clamp on Front of Machine. New 40 H.P. A.C. Motor and Drive. New Control Panel with Four barrel zones and three Die Zones using RKC Dual Display Controllers with Amp Meters, Mercury contactor relays, individual zone shut-off. Control Panel has Motor Amps, Motor R.P.M. Meters with ten turn speed pot. Pressure Gauge, Melt Temp, Rupture Disc. New Hopper with sight glass and drain tube. New sheet metal and guards. Machine 480 Volt with 110 volt control circuit.
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    60,500.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Plastic Industry Equipment - LA1238441
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    6" Davis Standard Pelletizing Line 32:1 with Grinder & Conveyor (Great for film). DS 6" 400 hp water cooled, vent (no vac. hardware), L/D ??, Gearbox 1.5 service factor @ 102 rpm. year 1995 Clean, updated panels, Berringer WRP-12v water ring, made 1994, with Berringer spin dryer model TD-10 Conair Wortex 125 hp grinder model 2442. 1/2" screen, made 1996. Augered bin feeds regrind into a crammer on the extruder long cleated belt conveyor
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    225,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Plastic Industry Equipment - LA1238440
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    6" PTI Complete Pelletizing Line. 6″ PTI Pelleteizing Line Consisting of the following: 6″ PTI 6000 Air Cooled Extruder – 500 HP AC Motor – 30:1 L/D – 13.9:1 Gear Box Ratio, Vented, Temperature Control Panel – New 1998 – New Screw, Barrel Gear Box and Motor in 2010 ! PRT Model Flash 300 – 12″ Screen Changer with 10 HP and Hydraulic Power Pack – New 2011 PRT Model WF-1100 Die Face Pelletizer with Spin Dryer and Water System – New 2011 PET USB1400 – 14″ x 48″ Stainless Steel Deck Screener – New 2011 Dri-Air 1500 – 1 Hot Air Dryher-Hopper with 5 HP Blower 5 assorted skids of Hopper Loaders, Hoppers, etc. Not under power… in plant.
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    175,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Plastic Extruders - LA1238438
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    2.5" HPM 24:1 Extruder - Rebuilt - Mint. 2 1/2″ HPM 24:1 HPM Extruder w/Screen Changer – Model 2.5 TMP- Rebuilt Rebuilt Gear Box – New Barrel with Manual Screen changer – Cast Finn Heaters, Barrel Cooling Fans – New Thermocouples – New Wiring – New Styrene Screw – New Control Panel with 4 Barrel Zones & 3 Die Zones with New Thermocouples. Control Circuit 110 volt with Step Down Transformer – New RKC Dual Display Controllers – RPM Meter Amp Meter E Stop – 10 Turn Speed-Pot – Melt Temperature – Amp meters on each zone with individual shut off. Pressure Gauge with Rupture Disc. New 40 HP AC Motor & Drive – New Sheet Metal and Guards – New Hopper with Drain Tube – 480 volt
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    60,500.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Film/Sheet Equipment - LA1238437
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    4.5" NRM Sheet Line w/20" x 78" 3-Roll Stack- Sheet Die and Hydraulic Shear. 4.5″ NRM Model PM III Extruder – Model 109229-01 – 32:1 L/D Gear Ratio 10.85.1 – 250 HP DC motor – Vented with Plug – Water Cooled – New 1988 – Extech Screen Changer with Power Pack. Gear pump Extrex Size 70/70 – Capacity 1,800 lbs./hour – 6 Barrel Zones & 11 Die Zones – 480 Volt. NRM Sheet Line: 20″ x 78″ – Model No. 1099229-07 – New 1988 – 3 Chrome Rolls – 2 Texture Rolls. Roll Stack 4 Speed Gear Box with 5 HP DC Motor. 22′ Cooling Bed. Sheet Dies: 80″ Master Flex CN/R/LD75 with inter change Lip R-Bar up to .250 Die Cart. 56″ R Bar with interchange Lip up to .250 Die Cart. Shear: Birmingham Hydraulic Shear – Width 80″ Model 8010 – New 2011 – 5 HP 220 volt. Run off Table.
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    185,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Plastic Industry Equipment - LA1238436
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    RDN TWO Roll Pullers. RDN TWO Roll Pullers - New 2002 (2 available) Two RDN Pullers Two Roll Used. Very Good Condition. Model No. 202-4. Serial No. 44552 & 45634. 14'' Wide. 10'' Dia. Rolls. 0ne H.P. D.C. Motor and Drive Thru Gear Reducer. 230 Volt 3 Phase 15 Amps.
    Quantity
    Units
    Frequency
    2
    each
    Ongoing
    Price
    Funds
    Per Unit
    10,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Extruders - LA1238435
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    Extruders. 4 ½’’ Gloucester Extruder 30:1 L. D. Water Cooled 200 H.P. D.C. No Vent 5 Barrel Zones 5 Die Zones Barber Coleman Series 10 Digital Controllers Material last Run P.E.T. 1 Spare Screw 4 ½’’ Extech Slide Plate Screen Changer Acrison Feeder Model 105 SE
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    70,000.
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Extruders - LA1238434
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    3/4" Akron 24:1 Extruder Model M Pack. 3/4'' 24:1 Akron Extruder - New 1994 Model M Pack Serial No. 9408 Date 7/27/94 2 Barrel Zones 2 Die Zones Eurotherm 94 Controllers 3 Extra Used Controllers Melt Temp Pressure 2 H.P. A.C. Motor and Drive Adjustable Centerline Height Prints and Manual Mounted on Casters 480 Volts Good Condition
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    15,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Extruders - LA1238433
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    18mm Leisztritz C0-Rotating Twin Screw Extruder MICRO 18 -LAB - New 1994. 18 mm Leistritz C0-Rotating Twin Screw Extruder – MICRO 18 – LAB – 1994 Ran only for LAB work Co-Rotating Twin Screws – 18 mm 30:1 L/D Ratio Screw Speed: 500 RPM 7 HP @ 2950 RPM – Motor Type – Lenze Model G Note: New Drive in 2016 VERY LOW HOURS
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    36,500.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Plastic Extruders - LA1238428
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    Reclaim Extrusion Line NGR 165 mm Model NGR X GRAN 165 - New 2009. 165 mm NGR Model NGR X GRAN 165 – Reclaim Extrusion Line – New 2009 Under power in plant! Material that can be processed: PE, PP, LDPE, HDPE, MDPE Screw Diameter: 165 mm Output: Up to 1200 Kg./hour 2645 lbs./hour L/D Ratio 40:1 Screen Changer: Xaloy EH80 Hydraulic Screen Changer Pressure sensor: 4000 PSI, MPI Conveyor Belt: Contains Mesutronic Metal Detector – Metron 05 Degassing: Double Degassing Power: 480 volt, 3 phase Further Information: Extruder Motor 370 Kw (500 HP) Cutter-compactor motor: 132 Kw Feed Screw: 45 Kw Vacuum Pumps: 4 Kw Dryer Motors: 15 Kw Heating Barrel Zones: 12 Air Cooled Accessories: Conveyor Belt – Metal Detector – Hot Granulation Die Face Cutter – Cutter-Compactor/Agglomerator – Water Bath – Centrifuge Call for appointment for inspection to see running product in plant.
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    825,000.
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Injection Molding - LA1238427
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    Netstal 800 Ton Injection Molders (Sunergy) Model S-800-2700E/1700 2C (High Speed) New 2008. Netstal 800 Ton Injection Molders ( SyNergy ) with duel injection units (Two) Units Available Model: S-800-2700E/1700 2C (High Speed) New: 2008 This Netstal is set up with dual injection today, but the secondary injection unit can be removed Min Shut Height: 45.276 inches Max Shut Height: 64.961 inches Clamp Stroke: 39.370 inches Max Daylight: 104.331 inches Tie bar spacing: 1220 mm x 1220 mm Mold height: Min and max Toggle Clamp, Min Shut Height 1150 mm, Max Shut Height 1650 mm, Clamp Stroke 1000 mm, Max Daylight 2650 mm Platen size: 1780 mm wide x 1870 mm high Injection unit # 1: Pot Diameter: 70 mm Length: 280 mm Cubic inches: 65.76 Grams (Polypro): 974.35 Injection Unit # 2: Pot Diameter: 70 mm Length: 280 mm Cubic inches: 65.76 Grams (Polypro) 974.35 Has robot interface With accumulators for high speeds Under Power
    Quantity
    Units
    Frequency
    2
    each
    Ongoing
    Price
    Funds
    Per Unit
    225,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Injection Molding - LA1238426
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    Netstal 600 Ton Injection Molder (High Speed). Netstal 600 Ton Injection Molder (High Speed) Model: Synergy S-6000-3700E Year: 2005 Min shut height: 33.465” Max shut height: 53.150” Clamp stroke: 37.402” Distance between tie bars: Max daylight: 90.551” Pot diameter: 80 mm Length” 98.16 cubic inches Grams: 1,454.42 Controls: Netstal, screenshot Has core pull Inj. accumulators Robot Interface Currently running with IML robots. Set up to run valve gated or hot tip runners. Can run hydraulic ejectors on either/both platens Under Power Very Good Condition
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    109,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Plastic Industry Equipment - LA1238425
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    Brook Silos (2 Units) Small 20,000 lbs. (10 Tons) Capacity - New 2006. Brooks Silos (2 Units) Small 20,000 lbs. (10 Tons) Capacity - 5 feet diameter x 4 rings high
    Quantity
    Units
    Frequency
    2
    each
    Ongoing
    Price
    Funds
    Per Unit
    8,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Plastic Industry Equipment - LA1238424
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    Brook Silos (2 Units) 40,000 lbs. (18 Tons) Capacity - New 2006. Brook Silos (2 Units) 40,000 lbs. (18 Tons) Capacity- New 2006 6 feet diameter x 5 rings high
    Quantity
    Units
    Frequency
    2
    each
    Ongoing
    Price
    Funds
    Per Unit
    12,500.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Plastic Industry Equipment - LA1238423
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    Brook Silos (3 Units) Large - 70,000 lbs. (32 Tons) Capacity - New 2006. Brooks Large Silos - 3 Units - New 2006 70,000 lbs. (32 Tons) Capacity 9 feet diameter x 10 rings high
    Quantity
    Units
    Frequency
    3
    each
    Ongoing
    Price
    Funds
    Per Unit
    18,500.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Plastic Industry Equipment - LA1238422
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    AEC 80 Ton Water Cooled Chiller New 1998. AEC 80 ton Central Water Cooled Chiller 1998 80 Ton – Water Cooled – Voltage 480
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    7,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Plastic Industry Equipment - LA1238421
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    80 Ton Shica Machinery Water Cooled Chiller - New 2018. Shica 80 Ton Water Cooled Chiller – New 2018 80 Ton – Water Cooling Capacity – PLC Controls – Voltage 480
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    38,500.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Plastic Industry Equipment - LA1238420
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    Quincy Air Compressor Model QSI-500. Quincy Air Compressor Model QSI-500
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    19,500.00
    CDN
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Plastic Industry Equipment - LA1238418
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    Zeks Air Dryer. ZEKS Air Dryer Model 2000HSFW400 2000 SCFM
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    10,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Plastic Extruders - LA1238417
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    Foam Scrap Reclaim Extrusion Line Holin 150mm & 120mm - New 2013. Holin Twin Extruder Recycling Line (Foam Scrap) 150 mm & 120 mm – 2013 Holin Twin Extruder Recycling Line Consisting of: 2 Extruders: 150 mm & 120 mm for recycling foam scrap 104 HP each or 77 Kw each Crammer Feeder 2 Slide Plate Screen Changers – 8″ & 10″ with Power Packs 8″ 25 Hole Strand Die 8 foot water bath with water re-circulation pump Air Knife 32 Knife Helical Rotor
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    32,500.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Plastic Extruders - LA1238416
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    Reclaim SIUS Extrusion Line 100 mm - New 2001. SIUS Model BN 100 AW 100 mm Recycling Line – 2001 Model BN 100 AW 100 mm – water cooled extruder with Vent (open) 50 HP/AC Motor Belt Driven Gear Box Complete Control Panel with AMP Meters and Heat/Cool zones and Heat Only Zones Slide Plaste Type Screen Changer with Power Pac With Rectanguler Feed Throat water cooled and Hopper with Sweeper Arm Water Ring Pelletizer and Water Cooling Slide Control Panel for Complete Line
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    29,500.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Plastic Extruders - LA1238415
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    Foam Sheet Line with 130 mm & 160 mm Extruders - New 2017. Chi Chang Machinery Foam Sheet Extrusion Line – New 2017 Line Consists of Two Extruders: 130 mm and 160 mm Water Cooled Fasi Gravimetric Blending System – New 2017 – Model FGB-2 – 4 Component Blending System with 2 Loading Receivers and 2 Self Contained Loaders HiTech Automatic Screen Changer – New 2017 – Model Eo7RXL – Continuous Screen Type – Complete with Closed Loop “Cycle Time” Control. Features of the Closed Loop – Time algorithm: Operational modes: OFF/AUTO/TEST/MELT – Password protected – Screen advancement based on constant increments according to a Tine Based Logic Cycle. The Closed Loop-Time algorithm is used to maintain a steady incremental rate of screen travel. The rate of screen movement are operator selectable and adjustable. Screen movement is verified by the controls. Immediate indication of any malfunction in screen movement is given by means of the NO FEED alarm. The automatic cycling is stopped, and the operational mode is turned off. Variety of heating patterns for the heater (s) can be selected to customize the controls for a variety of polymer and processing conditions. All the heating zones are monitored by temperature controllers. Power consumption indicators are also included. Door handle is interlocked with a disconnect switch inside the enclosure. Alarms (visual and audible) supplied for: NO FEED: screen movement cycle is not completed. NO COOL: accidental loss of cooling water to the line. NO HEAT: alarm stops operation of the controls and returns to OFF mode. prevents tracking issues by not allowing the screen to advance without adequate heating conditions. Protection supplied for: TEST: mode has max time protection. BOOSTER and EXILT LIP heater (s) have separate protection limits against overheating in all modes. Incorrect settings of the timers. MELT mode has an additional protection against overheating of BOOSTER and EXIT LIP that allows the cooling system to expedite the drop of temperature (mainly for low flash point polymers). Incorrect mode selection when properly interlocked with the extruder. Air Cooling Ring and Forming Mandrels Gas and C02 Metering Equipment & Pumps – Hammelmann Hi Pressure Gas Pump – Normal Operating Pressure – 2,200 lbs. – 480 volts 3 phase – 60 Hz. Hammelmann Hi C02 Pump – 480 VOLTS 3 Ph 60 Hz. Chi Chang Take-off System Chi Chang 2 Station Winding Unit. AC 480 Volts 3 Phase – 60 Hz. – Total Capacity 950 lbs/hour )( 430 Kg/hr.) – 160,000 lbs. per week. 638,400 Lbs./Month
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    265,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Plastic Industry Equipment - LA1238413
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    Irwin Thermoformer Model 50 - New 2013 - Never Used !. Irwin Thermoformer Model 50NT New 2013 “Never Used” Zero Hours !!!! Material Index: Maximum Chain Speed: 200″/Sec (5080 mm) Sheet Width: Max 52.5″ (1334 mm) Min 30″ (762 mm) Heat Tunnel: Length: 200″ (508 mm) Heating Element: Optional Quartz Temperature Control: B & R Automation +2 at 600 deg. F 1 at 316 deg. C Former: Maximum 52″ Wide (1321 mm) Minimum 30″ (762 mm) 50″ wide (1270 mm) 50″ long (1270 mm) Standard 2.50″ (64 mm) Optional: 3.5″ (83 mm) 60 Toms Standard 10″ (254 mm) Optional: Upt o 14″ (356 mm) 3.78″ (96 mm) Standard
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    225,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Plastic Industry Equipment - LA1238412
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    Irwin Thermoforming Line. Irwin Model 50NT-14 Thermoformer – New 2005 Type HTRH50-157-LT 480 volts 3 Phase – 60 Hz. Complete line with un-winder, feeder, oven, trim press, and Grinder Maximum Chain Speed: 200″/sec.(5080 mm) Sheet Width: Max 52.5″ (1334 mm) Min 30″ (762 mm) Heat Tunnel: Length: 160″ x 220″ (4064-5334 mm) – Hating Element: Standard: Cal Rod Optional: Quartz – Temperature Control: B & R Automation, +2 at 600 deg. F 1 at 316 deg C Former: Sheet Width: Maximum 52″ Wide (1321 mm), Minimum 30″ (762 mm) – Maximum Mold Size: 50″ wide (1270mm) Depth of Draw: Standard: 2.50″ (64 mm), Optional: up to 3.5″ (83 mm) – Press Rating: 60 Tons – Shut Height: Standard: 10″ (254 mm), optional Up to 14″ (356 mm) Platen Travel: 3.78″ (96 mm) Standard. Trim Press: Maximum: 52″ wide (1321 mm), Minimum 30″ (762 mm) – Product Deoth: Standard: 2.50″ (64 mm) Optional: 3.5″ – Stroke: 6″ (152 mm) – Maximum Cutting Force: 27.45 Tons – Standard Platen Opening: Index Direction: 14″ (356 mm) Across Sheet: Dry Circle Speed: 200 RPM – Servo Pick: Standard – Servo Canopy: Standard – Self Feed Treadle (Auto Start) Standard – Servo Ejector: Operational (Linear Rack Pinion) 50′ material width (1,270 mm) 27 Cycle Per Minute From 12 to 28 parts per cycle depending on product size Capable of producing 20,000 to 45,000 parts per hour or 600 lbs. /hour approx
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    210,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Plastic Industry Equipment - LA1238409
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    Chang Mei Thermofomer Model CME-1000. Chang Mei Thermoforming Model # CME-1000 220 volt, 50 co Hz 42′ Material Width (1,066 mm) Capable of producing: 12 cycles per minute or 96 to 240 parts per minute – depending on product size Production Capacity (5,760 to 14,400 parts per hour) 150 to 200 lbs./hour depending on product volume
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    125,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Plastic Industry Equipment - LA1238406
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    Brown Trim Press Model T-345V - New 1995. Brown Model T-345V Trim Press 1995 18″ x 50″ Forming Area 4″ Stroke – Platen configuration same as T-350V – 6 stroke at 15″ tool height – 4″ stroke at 16″ tool height – 12″ ejector stroke – 24.5″ max tool clearance – 54″ wide
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    46,900.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Film/Sheet Equipment - LA1238405
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    Lung Meng Pre Stretch Film Unwind/Rewind Machine - New 2008. Lung Meng Pre Stretch Unwind/Rewind – 2008 Model LM-PS-650C Voltage 220
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    16,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Film/Sheet Equipment - LA1238403
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    Lung Meng Blown Film Line Model LM AH 65SC - New 2005. Lung Meng Blown Film Line - Model LM AH 65SC - New 2005 - 65 mm Air Cooled Extruder with Zambello 2 Gear Box and 75 HP DC Motor - 2 HP Crammer Feeder with Die & Rotating Air Ring - Tower that is built in segments for ease of removal & set up. Also stairs & mezzanines. Treater Station - 50" Nip Rollers - Wood Collapsing Tower - Surface Winder -
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    89,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Plastic Industry Equipment - LA1238402
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    Chi Chang Laminating Line Model CCM-130-160 - New 2005. Chi Chang Laminating Line Model CCM-130-160 - New 2005 - 90 mm Extruder - air cooled - 75 HP - Control Panelwith 4 Barrel Zones Heat/Cool with Amp Meters, 4 Adaptor Zones Heat only with Amp Meters, Slide Plaste Type Chi Change Screen Changer with Power Pack - 54" Die with 45" Adaptor Die is equipped with Flex Lip & single point adjustment. 54" Roll Laminating Down Stream & Integrated Controls & Pull Roll Station - Chi Chang 2 Position Winder
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    65,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    To receive these types of leads with the full contact information included in the email,
    subscribe to our value added service

    Add a Listing       View Listings

    Back to Other Plastic Related Information

    Cooksmill NetSystems
    - File No: